HAAS Batwing Front Splitter


The original Batwing G8 splitter is the most aggressive front splitter available! The batwing style splitter exaggerates the G8’s angular curves and makes it the meanest looking car on the road.

  • Every batwing splitter is water jet cut for precision and accuracy.
  • Cut from 1/4″ automotive grade ABS plastic
  • Adjustment slots for +-1″ water jet cut into material.

Hardware not included, may take 4-7 business days for processing, typically 2-4 days transit time once shipped. Please see notes below for more information.

A Bad Haas Product

Purchase this product now and earn 175 G8Only Points!
SKU: Batwing-Splitter Category: Tags: , , ,


1. Installation hardware is not included in this kit and can be purchased at any local hardware store. Adjustment slots are predrilled and customers can customize placement on bottom of bumper to extend as far as they wish although it is made to sit flush with rear of bumper.

2. Removing front bumper may not be necessary, but it is advised to make the job easier, removal of from bumper can be done it roughly (20 minutes) and will help with the quality and placement of the finished product. See instructions on bumper removal here. http://www.g8board.com/forums/showthread.php?t=19042

3. Does require installation of nuts/bolts in rear of bumper (as there is no place there on the stock bumper to mount to.)

4. I would rate the difficulty of this project a 2 (from 1-5) as it is pretty straight forward.


There are no reviews yet.

Be the first to review “HAAS Batwing Front Splitter”