RaceFlux silicone heat shrink seals are used to create a dustproof and waterproof seal on the ends of our silicone-fiberglass heat protection sleeves (HS1 series heat sleeves).
To install, slide over the hose and heat sleeving before installing the hose ends. Center the sleeve and then heat with a heat gun or blow dryer to shrink.
|Part Number||For AN Hose||I.D. Pre-Shrink||I.D. Post-Shrink||Thickness Pre-Shrink||Thickness Post-Shrink||Length Each|
|HHS-1018-64||-4AN||20mm||13mm||1.0mm +/- 0.2mm||1.7mm +/- 0.1mm||2.5″ (64mm)|
|HHS-1025-64||-6AN, -8AN||25mm||15mm||1.0mm +/- 0.2mm||1.7mm +/- 0.1mm||2.5″ (64mm)|
|HHS-1035-76||-10AN, -12AN||35mm||20mm||1.3mm +/- 0.3mm||2.5mm +/- 0.3mm||3.0″ (76mm)|