Improved CCS Oil Catch Can, 7oz

Direct Fit for Gen III & IV LS Engines

This universal kit works with virtually all Gen III & IV LS-family engines. This single kit includes everything needed to accommodate the both the OEM quick-connect fittings found on later Gen IV engines as well as push-on barb connections found on earlier Gen III engines. See the Applications section at the bottom of this page for more details.

The kit includes custom lines and a billet aluminum bracket that bolts directly to the left or right cylinder head, plus an optional spacer to clear engine covers and evap lines in some applications. The multiple mounting options makes this a great kit for engine swaps! Please note that if mounting to the left side cylinder head, you will need longer lines, so contact us for assistance.

Why Install a Catch Can?

GM’s LS family small block engines often expel large amounts of oil and oil mist into the intake manifold. Most intake manifolds we have dismantled are coated in excess engine oil. This results in excessive carbon build-up on the intake valves and reduces the octane of the air/fuel mixture, affecting horsepower.

While carbon build up will not ruin your engine, it will result in reduced performance in the long run, so it’s important to keep the air as clean as possible. Adding a good catch can to the crankcase ventilation system will help reduce this carbon build up and keep your engine cleaner and running smoothly.

An Improved Oil Catch Can

Improved Racing set out to design the best air-oil separating catch can we possibly could. We focused on a three simple design goals:

1. Maximize efficiency: Separate as much vapor from crankcase blow-by fumes as possible with minimal restriction.
2. Easy to use: The catch can should be simple and enjoyable to use in every aspect including mounting, draining, and cleaning.
3. Durable: Virtually indestructible. Made from high-quality, reliable components. As with any Improved Racing product, nothing will vibrate loose or come apart under racing conditions.

The result is the CCS (Catch Can, Sport).

Highly Efficient Air-Oil Separation

The CCS’s design maximizes air-oil separation efficiency, resulting in a peak separation efficiency of 85-90%. For comparison, none of the competitor’s catch cans we tested showed a peak efficiency of more than 60%. These results were achieved on our bench testing system at air flow rates of 0-4.0 CFM and vaporized oil injection rates of 0.20-0.30 grams of oil per minute.

No Sight Glass Needed

Improved Racing’s quick-release reservoir is so easy to remove that it eliminates the need for a sight glass. Just push up and twist an 1/8th turn to remove the reservoir and look inside. No more fumbling or endless unscrewing to remove the reservoir.

No sight glass also means improved durability at higher operating temps. And no more trying to interpret a difficult-to-read sight glass to check your fluid level. Just look inside!

A powerful wave spring keeps the reservoir locked in place. A safety lock clip is also included just in case you want to be absolutely sure the reservoir cannot be removed.

LS Specific Mounting Bracket

Improved Racing’s CNC-machined LS specific mounting bracket can be mounted to either the right or left cylinder head, with or without an optional spacer. The optional spacer, shown in the photo below, offsets the can from the engine to clear larger engine covers, evap lines, etc.

This mounting solution is also great for engine swaps because it is not chassis-specific and can be used on any LS or Vortec engine! For more fitment information, please see the applications section.

Fast & Flexible Mounting Bracket System

We made the mounting bracket easy to use and remove because some engines bays are tight. Remove the can in seconds by unscewing the green nut. Installing and positioning is just as quick and easy. If you need a little more leverage, just use a 5/8″ or 16mm open end wrench on one of the nut’s lobes.

Positive Safety Lock Clip

The CCS comes with a safety lock clip. It’s peace of mind for crash protection or track events where a positive lock mechanism is required. Push to insert, pull to remove.

Extensive Testing

Development of the CCS happened over several years and included ANSYS Fluent CFD simulations, extensive bench tests, and on-vehicle street and track tests. Final prototype testing also included a 9-month beta testing program in collaboration with various road racers, drag racers, and drifters.

Comparative testing included Improved Racing’s prototypes and several catch cans from leading competitors. We ensured our catch can will beat the competition in filtration performance while maintaining a similar or lower pressure drop. Bench testing focused on maximizing efficiency at peak blow-by air flow rates of 3.7-4.0 CFM, where most other catch cans lack efficiency. The chart below (click to enlarge) shows some of our bench test results. Proprietary information and competitor’s names have been redacted.

Applications

• Universal fitment on left or right cylinder head on all Chevrolet Gen III and IV LS family engine blocks (including Vortec iron blocks) with the following properties:
  • Must use accessory drive systems with alternator on left cylinder head.
    • Some GM truck platform accessory drives block access to the cylinder head mounting location used with the kit.
    • Catch can may be mounted on the left cylinder head if the alternator is located on the right cylinder head, but longer lines will be needed. Contact us for assistance.
  • Must not have a factory airbox on the right side of the vehicle.
    • Some factory air filter boxes (mostly trucks) will interfere with the catch can. May clear some aftermarket cold air intakes.
  • Application Note: Engines with PCV line connection from the valve cover to the intake manifold (most 1997-2002 engines) will require splicing into the factory PCV line, longer lines, or upgrading to the newer style valley cover. Please contact us for assistance.
  • Application Note: Engines with an external PCV valve (most 1997-2004 engines) will require splicing the PCV valve into the new line or adding a restrictor in place of the PCV valve.
• Fits the following vehicles, subject to the requirements and notes in the first bullet point above:
  • 1998-2002 Chevrolet Camaro SS & Z28 / Pontiac Trans-Am
  • 1997-2004 Chevrolet Corvette (C5), all models
  • 2004-2006 Pontiac GTO / Holden Monaro & Statesman
  • 2004-2014 Cadillac CTS-V
  • 2005-2013 Chevrolet Corvette (C6), all models
  • 2005–2008 Pontiac Grand Prix GXP
  • 2006–2009 Chevrolet Impala SS
  • 2006–2007 Chevrolet Monte Carlo SS
  • 2008–2009 Buick LaCrosse Super
  • 2008-2009 Pontiac G8 GT & GXP, Holden VE Commodore
  • 2011-2015 Chevrolet Camaro SS & ZL1
  • 2011-2017 Chevrolet PPV Caprice, Holden VF Commodore
  • 2013-2017 Chevrolet SS, Holden VF Commodore
• Does NOT fit 2010 Chevrolet Camaro SS due to interference with the factory heater hoses that route over the intake manifold. The heater hoses must be moved out of the way to use this kit.

Dimensions

Specifications